- Top Pick: Rode PSA1 Swivel Mount Studio Microphone Boom Arm
- Runner-up: Rode PSA1 Swivel Mount Studio Microphone Boom Arm
- Also consider: Rode PSA1 Swivel Mount Studio Microphone Boom Arm
A microphone sounds its best close to your mouth at a consistent distance, and a boom arm holds that position through a long stream or recording session. Instead of a desk stand that picks up keyboard thumps and forces you to lean in, an arm suspends the mic where you need it, swings it aside afterwards, and frees the desk space underneath.
The five arms here cover the main shapes a buyer will meet: a classic swivel studio arm, a premium arm with spring damping and cable management, two low profile designs, and a budget scissor arm. The right pick depends on your desk, your monitors, and your microphone’s weight.
As an Amazon Associate, we earn from qualifying purchases.
Our Top Picks
FIFINE BM88 Low Profile Microphone Boom Arm StandLow Profile (BM88 Black)13 x 11.6 x 4.1 inches2.9 poundsCheck on Amazon
Top 3 picks at a glance
Quick answer
Start with the microphone you own and the desk you have. Heavier studio mics pair best with a studio-style arm such as the Rode PSA1 or the spring-damped PSA1+. If monitors block a tall arm, a low profile model like the Elgato Wave Mic Arm LP or FIFINE BM88 keeps the mic below screen height. The InnoGear arm suits lighter setups.
Rode PSA1 Swivel Mount Studio Microphone Boom Arm
The Rode PSA1 is the original model in Rode’s studio arm line and the reference point for a traditional swivel mount boom arm. It is a full-height arm that clamps to a desk edge or fits a desk-insert mount, holding the microphone over the desk near the speaker and pushing away when not needed. The clamp suits desks that cannot be drilled, while an insert mount gives a cleaner fixed point.
This is the standard PSA1 rather than the newer PSA1+ covered next, so compare them as separate models. The PSA1 keeps the design plain, with no cable management named in its listing, so owners route the cable with their own clips or ties. Its listing name states no numeric load capacity, so anyone running a heavy mic and shock mount combination should confirm the weight on the product page first.
| Spec | Detail |
|---|---|
| Model | PSA1 (original model) |
| Arm type | Swivel mount studio boom arm |
| Color | Black |
| Mounting | Desk clamp or desk-insert mount |
| Cable management | Not stated in the listing name |
| Load capacity | Not stated in the listing name |
Rode PSA1+ Professional Studio Arm
The Rode PSA1+ is the premium step up from the PSA1, and the two should never be confused: the PSA1+ is a distinct model whose listing name adds spring damping and cable management. Spring damping makes repositioning smoother and quieter, which matters on a live microphone, where knocks against a plain arm travel straight into the recording. Creators who adjust their mic position often benefit most.
The integrated cable management helps daily use too: the lead runs through the arm’s own management path instead of dangling loose, keeping the desk tidy on camera. Like the PSA1, the PSA1+ is a full-height studio arm in black needing the same clearance, and its listing name states no numeric load capacity, so check the combined accessory weight on the product page first.
| Spec | Detail |
|---|---|
| Model | PSA1+ |
| Arm type | Professional studio arm with spring damping |
| Color | Black |
| Cable management | Included, per the listing name |
| Mounting | Not stated in the listing name |
| Load capacity | Not stated in the listing name |
Elgato Wave Mic Arm LP
The Elgato Wave Mic Arm LP is the low profile entry in this guide, and that design defines who it is for. A low profile arm runs horizontally at desk level rather than rising in a tall arc, so the microphone stays below a monitor’s bottom edge and out of a camera frame. Streamers with dual or triple monitor layouts, where a conventional arm would collide with a screen, are the buyers this shape serves. Shop for the LP version specifically: it is a separate product from Elgato’s standard high-profile Wave Mic Arm.
Elgato describes the LP as a premium low profile arm with cable management channels, a desk clamp, versatile mounting, and full adjustability. The channels hide the lead along the arm, the clamp avoids permanent desk modification, and the mic drops in for recording and slides away for gaming. Desks against a wall still need measuring, since the arm needs horizontal room to fold.
| Spec | Detail |
|---|---|
| Model | Wave Mic Arm LP (Low Profile) |
| Arm type | Low profile microphone arm |
| Color | Black |
| Cable management | Cable management channels |
| Mounting | Desk clamp, versatile mounting per the listing name |
| Load capacity | Not stated in the listing name |
InnoGear Boom Arm Microphone Mic Stand
The InnoGear boom arm is the budget desk-clamp scissor arm of the group, and its listing name leads with compatibility: it names the Blue Yeti, HyperX QuadCast, SoloCast, Snowball, Fifine microphones, and the Shure SM7B among the mics it is built for. That makes it an easy first arm for a creator who owns one of those popular USB or streaming microphones and wants it off the desk. The scissor design is the classic folding frame, extending and collapsing in a zigzag from its clamp.
A scissor arm’s hold depends on how its springs and joints handle the microphone’s weight, and the listing name gives no numeric load capacity, so owners of heavier microphones should verify the pairing on the product page rather than assume the named compatibility covers every shock mount. One size caution: the listing offers a Medium option under a different selection, and this pick is the standard Black arm, so confirm the standard selection at checkout.
| Spec | Detail |
|---|---|
| Model | InnoGear Boom Arm (standard) |
| Arm type | Scissor boom arm |
| Color | Black |
| Mounting | Desk clamp |
| Named mic compatibility | Blue Yeti, HyperX QuadCast, SoloCast, Snowball, Fifine, Shure SM7B, and others per the listing name |
| Load capacity | Not stated in the listing name |
FIFINE Microphone Boom Arm BM88
The FIFINE BM88 is the second low profile arm in this guide, described in its listing name as a low profile adjustable stick microphone arm stand with a desk mount clamp, a screw adapter, and cable management. That combination suits podcast and streaming desks where the microphone stays low, slides in for a session, and parks out of the way without crossing a monitor. The included screw adapter matters because microphone thread sizes vary, and an adapter in the box removes a common setup snag.
From a brand many streamers know for its microphones, the BM88 pairs naturally with lighter streaming and podcast setups. As with every arm here, its listing name states no numeric load capacity, so look up your microphone’s weight, add any shock mount, and confirm the total on the product page first.
| Spec | Detail |
|---|---|
| Model | BM88 |
| Arm type | Low profile adjustable arm |
| Color | Black |
| Mounting | Desk mount clamp |
| Included fittings | Screw adapter, cable management |
| Load capacity | Not stated in the listing name |
How to choose
Start with microphone weight, because it rules out more arms than any other factor. None of the five listing names here states a numeric load capacity, so find the combined weight of microphone plus shock mount or adapter, then confirm it against the specifications on the arm’s product page. A heavy broadcast microphone on a light scissor arm will droop however carefully it is balanced, while a small USB microphone needs no heavy studio arm.
Next, choose the profile that fits the desk. A full-height swivel arm such as the PSA1 or PSA1+ needs vertical clearance and swing room, and rewards a fixed streaming position. A low profile arm such as the Elgato Wave Mic Arm LP or the FIFINE BM88 runs beneath monitor height and suits multi-screen desks and anyone on camera. Then check the mount: the desk edge must be thick enough, free of drawers or bevels at the clamp point, and reachable by the microphone cable. Finally, weigh cable tidiness: the PSA1+, the Wave Mic Arm LP, and the BM88 name built-in cable management or channels, while the PSA1 and InnoGear leave routing to the owner.
Who should skip
Skip boom arms entirely if a desk stand already holds your microphone at the right height and your recordings are short; an arm adds clamps and setup time casual voice chat does not need. Skip the full-height studio arms if monitors on a shelf leave no swing room behind the screens, and skip low profile arms if your desk is so deep that a horizontal arm cannot bring the mic close enough. Desks with a glass top or no accessible edge should wait for a suitable mounting surface, and owners of very heavy mic combinations should skip any arm whose product page does not confirm support for that weight.
FAQ
Does a boom arm improve microphone sound?
An arm does not change the microphone itself, but it holds the mic closer to your mouth at a steady distance, where most of the audible improvement comes from. It also lifts the mic off the desk, away from keyboard knocks a stand would pick up.
Which arm suits a multi-monitor streaming desk?
A low profile arm usually fits better, travelling horizontally below screen height instead of arcing over monitors. The Elgato Wave Mic Arm LP and the FIFINE BM88 here are both low profile designs; measure the space beside your monitors first.
Are the Rode PSA1 and PSA1+ the same arm?
No. The PSA1 is the original swivel mount studio arm, while the PSA1+ is a separate premium model whose listing name adds spring damping and cable management. They have different listings and ASINs, so check the model name when ordering.
What should be checked before clamping an arm to a desk?
Check that the desk edge is solid, thick enough for the clamp, and clear of drawers or bevels at the mounting point. Also confirm the microphone’s thread fits the arm or that a screw adapter is included, as with the FIFINE BM88.
Final verdict
For a traditional studio setup with room to swing, the Rode PSA1 remains the straightforward pick, and the PSA1+ earns its premium place with spring damping and built-in cable management. Desks crowded with monitors are better served by a low profile design: the Elgato Wave Mic Arm LP for its channels and versatile mounting, or the FIFINE BM88 with its screw adapter. The InnoGear scissor arm is the sensible first step for owners of the popular USB microphones named in its listing. Whichever shape fits, confirm the microphone’s weight on the product page before ordering.
Related guides
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.



