Black Myth: Wukong Benchmark: PC System Requirements & Best Hardware to Run It (2026)

Thinking about running Black Myth: Wukong Benchmark on your PC and wondering what hardware it actually needs? The Black Myth: Wukong Benchmark Tool is a free standalone utility — filed on Steam under Free To Play and Utilities and released on August 12, 2024 — that evaluates your hardware performance and system compatibility by rendering a real in-game sequence from Black Myth: Wukong in real time. It isn’t the game itself, and it isn’t a long download either: the tool needs just 9 GB, a fraction of what the full title asks for. This guide breaks down the official PC requirements, the best GPU for each resolution, and sensible build recommendations for getting a clean, repeatable result out of the benchmark.

How Demanding Is Black Myth: Wukong Benchmark?

Black Myth: Wukong Benchmark renders a genuine in-game sequence from a modern Unreal Engine 5 title, so it is a real workload rather than a synthetic number generator — but it is a moderate one, not an extreme one. The official minimum names an NVIDIA GeForce GTX 1060 6GB or AMD Radeon RX 580 8GB alongside a Core i5-8400 or Ryzen 5 1600, and the official recommended tier is an RTX 2060, RX 5700 XT or Intel Arc A750. Both sets of specifications were tested with DLSS, FSR or XeSS enabled, which is the important detail: the listed GPUs assume upscaling is switched on, so a large part of how smooth the sequence looks comes from image reconstruction rather than raw native rendering. In practical terms, 1080p with upscaling is comfortable on modest hardware, 1440p wants a solid mid-range card, and 4K with settings pushed up is where the render becomes genuinely heavy. And because this is a benchmark rather than a game, a lower score isn’t a failure — turning settings up is exactly what the tool is for.

Black Myth: Wukong Benchmark Official PC System Requirements

The developer publishes two tiers for the tool. Both were tested with DLSS, FSR or XeSS enabled, so the GPUs listed assume upscaling rather than native resolution, and both call for 16 GB of RAM. Storage is unusually light at 9 GB, with an SSD recommended at minimum and required at recommended.

Source: the official Black Myth: Wukong Benchmark Tool Steam store listing (app 3132990), checked October 2026. Publishers can update these specs after patches.

Best GPU for Black Myth: Wukong Benchmark by Resolution

1080p

For 1080p, the NVIDIA GeForce RTX 4060 sits comfortably above the official minimum, and with DLSS or FSR enabled it leaves plenty of room to raise settings. The minimum spec itself — a GTX 1060 6GB or RX 580 8GB — will run the benchmark at 1080p with upscaling on, so you don’t need a new card to get a usable result. Current-generation options such as the RTX 5060 or the Radeon RX 9060 XT occupy the same bracket with more headroom, and older cards like the RX 6600 or GTX 1660 Super still clear the official bar.

1440p

Step up to the NVIDIA GeForce RTX 4070 SUPER for 1440p with the settings turned up and upscaling enabled. The official recommended tier — RTX 2060, RX 5700 XT or Arc A750 — is the realistic floor here, and this class of card gives you comfortable headroom above it. The RTX 5070 and Radeon RX 9070 are the current-generation equivalents if you’re buying new, while an RTX 3070 or RX 6800 remains a perfectly good 1440p option.

4K

For 4K, the NVIDIA GeForce RTX 4070 Ti SUPER is a sensible entry point, and you will want DLSS or FSR active — the official specs assume upscaling at every tier, and 4K is where that matters most. Higher tiers such as the RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT give noticeably more headroom if you intend to run the sequence with settings maxed.

CPU, RAM and Storage for Black Myth: Wukong Benchmark

The processor side of this benchmark is undemanding. The official minimum is an Intel Core i5-8400 or AMD Ryzen 5 1600, and the recommended is a Core i7-9700 or Ryzen 5 5500 — both modest targets, which tells you the tool leans on the GPU rather than the CPU. A modern six-core such as the AMD Ryzen 5 7600 is already well beyond what the benchmark needs, and the AMD Ryzen 7 7800X3D is more CPU than this particular workload will use. Intel buyers can look at the Intel Core i5-14600K, which is likewise far above the recommended i7-9700. For memory, 16 GB is both the minimum and the recommended figure, so 16 GB is the target; 32 GB such as the Corsair Vengeance DDR5 32GB is comfortable headroom rather than a requirement. Storage is the lightest requirement of all at 9 GB, with an SSD recommended at minimum and required at recommended — any SSD covers that, and a fast drive like the Samsung 990 Pro 2TB NVMe SSD is far more capacity than the tool itself needs.

Recommended PC Builds for Black Myth: Wukong Benchmark

1080p budget build: NVIDIA GeForce RTX 4060 + AMD Ryzen 5 7600 + 16 GB DDR5 — comfortably above the official minimum and enough to run the benchmark at 1080p with settings raised and upscaling on.

1440p sweet-spot build: NVIDIA GeForce RTX 4070 SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + 2TB NVMe SSD — the setup most players should aim for, well clear of the recommended tier with room for higher settings.

4K high-end build: NVIDIA GeForce RTX 4070 Ti SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + fast NVMe SSD — for running the sequence at 4K with upscaling enabled, where the graphics card does almost all of the work.

Is It Worth Upgrading Your PC for Black Myth: Wukong Benchmark?

Because the official minimum is a GTX 1060 6GB or RX 580 8GB, a 16 GB memory target and only 9 GB of storage, plenty of older systems can already run this benchmark — so treat it as a measuring tool first and an upgrade trigger second. If your score comes back below where you want it, the graphics card is the part that moves the needle most, since the CPU requirements are genuinely low and a mid-range processor from the last several years will not hold you back. Memory is a simple check: if you’re below 16 GB, topping up to 16 GB meets the official figure, and 32 GB is only worth it as general headroom. One caveat worth knowing before you spend: this is the benchmark utility, not the full game. If you’re upgrading in order to play Black Myth: Wukong itself, check that game’s own requirements and storage footprint, which are considerably larger than the 9 GB the tool asks for.

Can You Play Black Myth: Wukong Benchmark on a Laptop or Handheld?

The tool is listed for Windows 10 64-bit, and a gaming laptop with a modern discrete GPU — an RTX 4060 mobile or better — will handle the sequence at 1080p with DLSS, FSR or XeSS enabled, though expect more heat and shorter battery life than a desktop. On handhelds such as the Steam Deck or ROG Ally you are sitting near or below the minimum graphics tier, so plan on lower settings with upscaling doing a lot of the work, and treat the result as an indication of how the full game would behave rather than a long play session. Storage is a non-issue here: at 9 GB, the tool fits comfortably on almost any SSD or microSD card.

How to Boost FPS in Black Myth: Wukong Benchmark

If your result is lower than you’d like, enable upscaling first — DLSS on NVIDIA, FSR on AMD or XeSS on Intel. The official specs assume it’s on, and it offers the single biggest gain. Frame generation is worth trying if the tool offers it for your GPU. Beyond that, lower the heaviest visual settings before you drop resolution, since shadows and post-processing effects usually cost the most for the least visible benefit at a glance. Keep your graphics drivers current, close background applications before a run so the score isn’t skewed, and make sure the tool is installed on an SSD, as both official tiers request. Finally, remember that consistency matters more than a single peak number — running the benchmark a couple of times gives you a more reliable picture of your hardware.

Frequently Asked Questions

Can my PC run Black Myth: Wukong Benchmark?

The official minimum is an Intel Core i5-8400 or AMD Ryzen 5 1600, 16 GB of RAM, an NVIDIA GeForce GTX 1060 6GB or AMD Radeon RX 580 8GB, Windows 10 64-bit and 9 GB of storage, with an SSD recommended and upscaling enabled. If you meet that, you can run the benchmark. For the recommended tier, the targets are a Core i7-9700 or Ryzen 5 5500 and an RTX 2060, RX 5700 XT or Intel Arc A750, with an SSD required.

Is Black Myth: Wukong Benchmark demanding on PC?

It’s a modern Unreal Engine 5 workload, but a moderate one rather than a punishing one — the official minimum is a GTX 1060 6GB or RX 580 8GB, and both tiers assume DLSS, FSR or XeSS is enabled. Hardware that’s several generations old can still produce a valid result at 1080p with upscaling, while 1440p and especially 4K are where a stronger GPU starts to matter.

What GPU do I need for Black Myth: Wukong Benchmark at 1440p 60fps?

A NVIDIA GeForce RTX 4070 SUPER-class graphics card is a sound choice for 1440p in this benchmark, with upscaling enabled as the official specs assume. The recommended tier — RTX 2060, RX 5700 XT or Arc A750 — is the baseline to clear, and cards in the RTX 5070 or RX 9070 bracket are the current-generation equivalents.

How much RAM does Black Myth: Wukong Benchmark need?

16 GB is both the official minimum and the official recommended figure, so 16 GB is the target. 8 GB falls short of the published requirements, and going to 32 GB is useful headroom for general gaming rather than something this benchmark specifically demands.

Do I need an SSD for Black Myth: Wukong Benchmark?

An SSD is recommended in the minimum specification and required in the recommended one, so yes — install it on an SSD. The good news is that the tool only needs 9 GB, so any solid-state drive has room; a fast NVMe model like the Samsung 990 Pro is more than sufficient.